Cycling is an intrinsically safe activity. The danger involved in cycling is posed by motor traffic and poor road design that pushes the two modes into conflict.
- Cycling Embassy.org.uk
Introducing Turn Lights - Indicator lights for your bike.
Enabling cyclists to indicate turns while maintaining full control of the bicycle, Turn Lights are highly visible, highly effective indicators for your road, hybrid or mountain bike.
Scroll down for the latest prototype pics and test footage...
TESTING
Bluetooth®
Advanced Bluetooth® 5 - The nRF52840 is an advanced, highly flexible single chip solution for today’s increasingly demanding wireless applications. It is designed ready for the major feature advancements of Bluetooth 5 and takes advantage of Bluetooth 5’s increased performance capabilities which include long range and high throughput modes. The nRF52840 adds best-in-class security for CortexTM-M Series
Controls
One button attaches to each side of the handlebar for left and right indication.
Single press: 7 second indication (small corners).
Double press: 14 second indication (large corners / roundabouts).
Both buttons 5 second press: reconnect devices.
Both buttons 10 second press: reset devices.
ASSEMBLY
Turn Lights easily clip on and off brackets fixed to the the frame of your bike. The front and rear units are wirelessly synced using a secure Bluetooth® connection.
Technical Spec
Battery: 3.7V 100MAH Lithium Ion. 1 months typical usage* per charge.
Bulb: 3 x 5mm Superbright LED per head.
Brightness: 1000 mCd.
Weatherproof
Turn Lights are IP64 rated meaning that they are totally sealed and protected against water splashes from all directions. They'll survive the harshest of UK Winters.
mICRO-usb
rECHARGEABLE
1000 mAh lithium-ion batteris are fully charged within 6 hours and last a month of typical usage.
lights
These are for more than just battery level indication (25% battery capacity per LED), bulbs 1 and 4 flash when indicating left and right to keep you aware of your indications.
lens
Turn Lights use fresnel shaped lenses to concentrate light into a powerful beam, Unmissable by other road users and equivalent to the brightness of standard moped or motorbike indicator lights.
.jpg)
pairing
Pairing the two devices is as simple as turning them on. All four LEDs will flash until synced. This takes 1 or 2 seconds. If for any reason the two devices become disconnected the 4 LEDs will flash until resynced.